Testing the soil of its fertility and other components is the first step to attaining a healthy lawn. Normally, soil testing is either a series of tests or a single one done on a sample for the purposes of determining its contents. The analysis can be done to determine a single property like pH level or several other properties. For the purposes of determining different properties, several tests are run on the sample. When one needs Soil Testing Ventura County Offers the perfect location to visit.
Determining the chemical, physical, and/or biological properties is the reason why samples are tested. Through chemical examination, presence or absence of plant nutrients is established. Such nutrients include lime, potassium, humus content, nitrogen, pH level, and phosphorus. Total sulphur, organic matter, trace elements, total CaCO3 are also other components measured. Physical properties of soils include permeability, density, and capacity and these too are focus of the analysis.
The analysis process involved a number of steps, starting with the collection of samples. The samples are then taken to local cooperative extension offices for analysis. One may also take the samples to some garden centers or independent laboratories. This process usually costs cheaply at about ten dollars per sample. It takes a few days for one to receive the results back after sending a sample.
Taking a sample from the field should be done using a shovel, sampling tube, and a pint. One should dig a hole to a depth of 4 to 6 inches and collect the sample using a sampling tube. Between 5 and 6 samples should be collected around the plot. There are several ways to collect samples. One may follow two lines each on either side of the plot or move in a zigzag direction.
Samples must be free of debris including grass and thatch. The samples are then to be thoroughly combined preferably in a plastic bucket. Form here, one must proceed to obtain one pint from the mixed samples. The obtained pint of soil must be placed against a flat surface and dried in the sun. To remove moisture from the sample other means of air drying may be used.
Laboratories prefer dry samples and that is the purpose of air drying. Besides, additional microorganism activity that can alter sample properties is eliminated through air drying. Without air drying, test outcomes emerging from those samples may fail to represent the exact soil conditions in the field. Microorganism activity in the sample may also be brought to halt through freezing.
With the one pint of sample collected, one should label it correctly before sending it to the laboratory. One may use their name as the label. The sample should then be sent to the laboratory for analysis. One should expect results in a few days together with a detailed analysis.
For better yard performance or crop production, the type of fertilizer to be used in the farm should be based on results obtained. Before growing of plants or lawn, pH restoration must be done if the pH value was not at the right level. With this approach, it is more effective to grow crops and lawns as good heath is achieved and maintenance made easy.
Determining the chemical, physical, and/or biological properties is the reason why samples are tested. Through chemical examination, presence or absence of plant nutrients is established. Such nutrients include lime, potassium, humus content, nitrogen, pH level, and phosphorus. Total sulphur, organic matter, trace elements, total CaCO3 are also other components measured. Physical properties of soils include permeability, density, and capacity and these too are focus of the analysis.
The analysis process involved a number of steps, starting with the collection of samples. The samples are then taken to local cooperative extension offices for analysis. One may also take the samples to some garden centers or independent laboratories. This process usually costs cheaply at about ten dollars per sample. It takes a few days for one to receive the results back after sending a sample.
Taking a sample from the field should be done using a shovel, sampling tube, and a pint. One should dig a hole to a depth of 4 to 6 inches and collect the sample using a sampling tube. Between 5 and 6 samples should be collected around the plot. There are several ways to collect samples. One may follow two lines each on either side of the plot or move in a zigzag direction.
Samples must be free of debris including grass and thatch. The samples are then to be thoroughly combined preferably in a plastic bucket. Form here, one must proceed to obtain one pint from the mixed samples. The obtained pint of soil must be placed against a flat surface and dried in the sun. To remove moisture from the sample other means of air drying may be used.
Laboratories prefer dry samples and that is the purpose of air drying. Besides, additional microorganism activity that can alter sample properties is eliminated through air drying. Without air drying, test outcomes emerging from those samples may fail to represent the exact soil conditions in the field. Microorganism activity in the sample may also be brought to halt through freezing.
With the one pint of sample collected, one should label it correctly before sending it to the laboratory. One may use their name as the label. The sample should then be sent to the laboratory for analysis. One should expect results in a few days together with a detailed analysis.
For better yard performance or crop production, the type of fertilizer to be used in the farm should be based on results obtained. Before growing of plants or lawn, pH restoration must be done if the pH value was not at the right level. With this approach, it is more effective to grow crops and lawns as good heath is achieved and maintenance made easy.
About the Author:
You can find an overview of the benefits you get when you use professional soil testing Ventura County services at http://www.advancedgeotechnical.com today.
No comments:
Post a Comment