In some occasions, the terms fake grass/turf or synthetic turf/grass are used to refer to artificial turf. The manufacture of the product occurs in a factory setting prior to its transportation to the place it is intended to be used. Generally, it finds a lot of use where the maintenance of natural grass is a problem. In addition to this, it is also used where it is impossible or undesirable for grass maintenance. Here are facts regarding Florida artificial turf.
This product is very tough, which allows it to withstand a high level of frequent use without undergoing significant degradation. This is a quality that has allowed the product to find a lot of use in sports arenas and stadiums. It has grown a lot in popularity allowing for its use in other spaces such as playgrounds, golf courses, and private lawns.
There is a long history associated with this product. The first instance when the product was produced and marketed was in early 1960s. Chemstrand Company refers to the company that brought the product to the market. This company later came to be renamed Monsanto Textiles Company. The production technique for the product is similar to the production of carpets. However, the design specifications for fake grass make it tougher and increases its durability contrary to rugs and carpets.
Production methods used in the early 1960s were very basic and the materials used were inferior. With time, more research has been invested into these products, allowing for the use of very advanced methods. The materials in use today are also very advanced to withstand the wide range of extensive use that the products are put to. There are different grades of the product so that a buyer can choose depending on the use they have for it.
UV damage has been a major problem in first and second generation products. However, that problem has been solved in modern products because they are treated with chemicals that protect against UV damage. Tear and wear caused by friction has also be lowered through the use of better quality materials. Abrasion in these products has also be lowered a lot, something that has resulted in lesser instances of injuries to athletes.
Same way rugs and carpets do, fake grass comes with a backing and a feathery upper part comprising the blades. The material used in manufacture of backings of carpets is similar to the material used to make backings on these products. In the manufacture of low quality products, some of the materials employed include plastic, polyester, and jute. In comparison to this, the use of polyester tire cord happen in making backings in high-quality products.
These products have blades that can be made using different materials like nylon and polypropylene. The nylon blades can be made using a number of methods. One of the methods involves the blades being made in the form of thin sheets that are then cut into strips. Another method involves production of the blades by means of molding for the blades to form with a round or oval cross-section. Blades made from thin sheets have less natural feel than extruded blades.
For transportation, the product is usually rolled in the same way as real turf. The surface where installation will be done must be prepared adequately before installation. If the area is too large, it is important to hire a service company for surface preparation and installation.
This product is very tough, which allows it to withstand a high level of frequent use without undergoing significant degradation. This is a quality that has allowed the product to find a lot of use in sports arenas and stadiums. It has grown a lot in popularity allowing for its use in other spaces such as playgrounds, golf courses, and private lawns.
There is a long history associated with this product. The first instance when the product was produced and marketed was in early 1960s. Chemstrand Company refers to the company that brought the product to the market. This company later came to be renamed Monsanto Textiles Company. The production technique for the product is similar to the production of carpets. However, the design specifications for fake grass make it tougher and increases its durability contrary to rugs and carpets.
Production methods used in the early 1960s were very basic and the materials used were inferior. With time, more research has been invested into these products, allowing for the use of very advanced methods. The materials in use today are also very advanced to withstand the wide range of extensive use that the products are put to. There are different grades of the product so that a buyer can choose depending on the use they have for it.
UV damage has been a major problem in first and second generation products. However, that problem has been solved in modern products because they are treated with chemicals that protect against UV damage. Tear and wear caused by friction has also be lowered through the use of better quality materials. Abrasion in these products has also be lowered a lot, something that has resulted in lesser instances of injuries to athletes.
Same way rugs and carpets do, fake grass comes with a backing and a feathery upper part comprising the blades. The material used in manufacture of backings of carpets is similar to the material used to make backings on these products. In the manufacture of low quality products, some of the materials employed include plastic, polyester, and jute. In comparison to this, the use of polyester tire cord happen in making backings in high-quality products.
These products have blades that can be made using different materials like nylon and polypropylene. The nylon blades can be made using a number of methods. One of the methods involves the blades being made in the form of thin sheets that are then cut into strips. Another method involves production of the blades by means of molding for the blades to form with a round or oval cross-section. Blades made from thin sheets have less natural feel than extruded blades.
For transportation, the product is usually rolled in the same way as real turf. The surface where installation will be done must be prepared adequately before installation. If the area is too large, it is important to hire a service company for surface preparation and installation.
About the Author:
Get a summary of the things to consider before picking a Florida artificial turf installer and more information about an experienced installer at http://www.ecogreengardencenter.com/artificial-grass.html now.
No comments:
Post a Comment