Essential Information On Ways Of Going Through An Airbrush Suntan

By Haywood Hunter


If there is a much faster way of making your skin stunt and healthier, then it is through airbrush suntan. You will go through this process without exposing your skin to the damages of direct sun rays. What would have been obtained from the sun for a long period can now be obtained within a few minutes, from right inside the house.

Getting a shower is the first thing to be done in preparation for airbrushing. This is important as it gets rid of natural oils which have accumulated throughout the day. Another reason is that the brushing will perfectly work on a clean skin as compared to a dirty one.

Application of any oils or moisturizer should be avoided when preparing for the tanning. There is a tendency of the airbrush liquid not sticking in case the skin is moisturized. Instead, you should just do a thorough dry up of your skin after showering.

As the session begins, you should wear loose clothing which actually does not cover too much of your skin. This is to enable you get a tan coverage that is complete. Drying process will also be minimized if your garment is loose enough.

The initial layer should start from the foot as you work upwards to the knee. Addition of another layer can be effected after the first one dries up. However, this decision can be reached at if the depth of the shade is not good enough.

The thighs are then handled immediately after the feet, before eventually tanning the entire upper body. The forearm and the elbow should however get more attention to avoid creasing of the tan. By this, a light pressure can be put in place as you mist the front elbow area as well as the back end.

The neck and shoulders should also be evenly coated by proper tanning. When it comes to your back, it is advisable to enlist a friend to help out. It could be quite difficult in reaching the far angles if you carry out the back tanning by yourself.

In the process of drying up, make sure your arms and legs are open. This is because the skin should not be in contact with another for a few minutes to aid in the drying process. Opting for a blow dryer could help assist in the drying process in a much faster way.

The tan can be kept fresh after it dries, through using a moisturizer. Light soap wash is also recommended and can help in keeping the tan stay longer. The top layer of your skin is where the tan is saturated hence; any skin exfoliation should be avoided.

For an effective airbrush sun tan, a tan extender cream can be applied to aid in keeping the tan stay as long as possible. Avoid any alcoholic application as this also has a tendency of removing the tan unnecessarily. Re application can be done after two weeks or even more, depending on how you take care of your skin henceforth.




About the Author:



No comments:

Post a Comment